Health, Safety and Welfare for the Construction Industry

Health, Safety and Welfare for the Construction IndustryContentsLO2: Understand the main requirements of an effective health and safety policyLO3: Understand hazard and risk identification in design and constructionLO4: Understand the need to review, revise and monitor risk assessmentsLO5: Be able to undertake risk assessments.BibliographyHNC 006Health, Safety and Welfare for the construction industryLO2: Understand the main requirements of an effective health and safety policyTask 2.1State the typical organisational health and safety policies and procedural documents that would be considered by the construction site as part of management strategy in order to maintain health, safety and welfare. Construction is a dangerous industry; in 1995 the Construction Design and Management regulations came into force to attempt to help to reduce the number of accidents both serious and fatal and ill health. The aim of the regulations was to place certain duties on the designers and client of the projects as well as the contractor who will be carrying out the works. The construction industries safety record between the years 1981 – 1992 was poor, nearly 1400 people had fatal accidents, which accumulated to 140 deaths per year. Current health and safety legislation is based on the Health and Safety at Work Act 1974. The Health and Safety at work act is an enabling which means that the government can issue subordinate laws under it. The laws have built up over a duration of time making them more relevant to modern day employment and the construction practice. The purpose of the Health and Safety at Work act was to provide a safe working environment and improve working conditions by securing the health, safety and welfare of the workers, protecting visitors and persons around the work place, controlling hazardous substances and controlling emissions. Under the Health and Safety at Work Act the employer has to ensure the required health and safety of their employers whilst at work. Inspection may take place on site and carried out by a union Health and Safety representative. Before they go on site the representative must give a reasonable notice in writing as to when they intend to carry out the inspection of the workplace. The frequency of the inspections depends on the nature of the work, if the work environment is of low risk inspections may be less often than workplaces with high risk.1: picture 1To be compliant with the legal requirements certain records and certificates are required such as records of inspection, accident books, records of scaffold inspections and records of inspection of excavations.Record of inspectionsSafety Inspections are carried out on site, they are necessary as they ensure that all certificates are up-to-date including lifting equipment and scaffolds. Inspections should be undertaken every week or when certain items such as lifting equipment have been moved or erected and when scaffolds have been subjected to bad weather to see if any structural changes should be made.  The inspection is the responsibility of the Health and Safety Executive.To ensure that lifting operation will be safe and successful, all lifting equipment should be checked and maintained to prevent failure. If the equipment is not inspected, it can lead to serious injuries or fatalities. Due to the number of injuries occurring from poor equipment the Health and safety law have placed obligations on those who provide, control and use the lifting equipment to manage risks and reduce their occurrence. The users of the equipment may have to undertake pre-checks before using any equipment to ensure that they are compliant with using it, also the employers should ensure that before the use of the equipment it is thoroughly examined. Checks are vital to verify that the lifting equipment can continue to be used safely. For the lifting equipment and its accessories to be deemed as safe to use, thorough examinations need to be carried out throughout the equipment’s life time including before it is used for the first time and after assembly. If the equipment is less than a year old, it only has to be tested when it is erected. There are standard procedures and criteria that needs to be met which a competent person will follow when undertaking examinations and making judgements to ensure that the equipment can be continued to be used safely such as functional checks, visual examinations and measurements of wear. Examination schemes don’t need to be preserved in a form of a document, however there needs to be a written copy to show the relevant authority.2: Picture 2When excavations are being carried out on site, precautions are required to be maintained. A competent person must inspect the support or battering excavation, no work can start unless the excavation is deemed as safe. Before work begins the client must provide the contractor with the relevant information to carry out the excavation such as the ground conditions, the location of existing services and underground structures. Excavations should also be inspected after any event that can affect their strength. A record of inspection will be required along with any faults that are found.Scaffolds need to be erected to a general recognised standard configuration which is a requirement of the Work at Height Regulations. The scaffold users and hirers have the responsibility to ensure that all of the scaffolding has been inspected before use, subjected to bad weather and at an interval of no more than 7 days thereafter. All scaffold inspections should be carried out by a competent person whose training and knowledge is appropriate for the type and complexity of the scaffold. The scaffold inspection report should note any defects or matters that could give a rise to risk to health and safety and any corrective actions taken.Accident Book There needs to be an accident book on any site that has ten or more persons at the same time. Employers and employees can use this book to record details of injuries and near misses on site. The accident book is a vital document that can be used to record accident information as part of their management of health and safety. All details of injuries must be recorded as a requirement under the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations. The law changed on the 6th of April 2012 stating if a worker sustains an injury from an accident and becomes incapacitated for more than seven days it needs to be reported to RIDDOR. The book needs to be available for inspection at all times and should be kept for a minimum of 3 years after the last entry. When reporting injury information details such as the name and address of the person injured, a description of what happened and the date and time of the injury need to be noted.Induction & TrainingAn induction is required to help the employee understand the rules and regulations of the site. All employees, workers and visitors must have one before they are allowed on the site. If people are uninformed about the sites activity it may cause a hazard in an event of an emergency. The induction includes information on certain aspects of the site and other information such as site rules, first aid, hazards, waste removal, working hours, facilities and evacuation procedures. Training is a vital element of health and safety. Employees who have the appropriate training and equipment usually result in a workforce with a lower accident rate than a workforce who has not had the appropriate training. Training can take the form of a tool box talk which involves the employees gathering in a meeting area to discuss hazards, control measures and any other high-risk activity on site.Health & Safety PolicyIf an employer has five or more workers they must prepare a health and safety policy. A company’s health and safety policy should demonstrate an ongoing commitment to improve health and safety at work throughout the organisation. The policy should state a company’s intent on the required behaviour and approach it demands between health and safety and business performances. The policy also must be reviewed and revised regularly and needs to be given to all employees. If the policy is not provided a fine up to £20,000 could be issued in a Magistrates Court. A Health and Safety Policy should consist of a general statement of the works to be carried out, detailed arrangements of procedures and systems and company structure and obligations of employees. General responsibilities of the employer and the employee should be outlined and signed and dated by the person within the company who has the responsibility for health and safety.For the health and safety policy to be effective there must be a framework that is clear to all employees. An organisation chart will be used to show the administration for the sites size and complexity and the obligation of the employees. At the company I work for (Mulalley & Co LTD) we have one for the site I’m currently working on showing the operations manager, project manager, senior site manager and the site manager.The policy should also clarify what the chain of command is in terms of health and safety managements, the identity of personnel who are accountable for ensuring arrangements for safe working  are drawn up, monitored and implemented, aspects of health and safety each level of employee must manage and the arrangements for employee representation in relation to health and safety.It is important that health and safety systems are in place in order to deal with hazards and risks related to the nature of works that are carried out. The Health and Safety Policy sets out the practical arrangements that will need to be implemented such as procedures for reporting accidents, fire and emergency evacuation procedures, provisions of welfare, arrangements for first aid, staff training, detailed instructions for operation of plant and equipment and procedures for dealing with subcontractors and visitors to the site. The policy also needs to be in compliance with Regulations including COSHH, manual handling, ‘six pack’ and the noise at work regulations. Appendices can give more detail to specific provisions outlined in the policy; however there is no requirement to add any to a Health and Safety policy. Determine typical certification requirements such as CSCS cards, hot permit, crane, fork lifting and other site operations that require health and safety compliance.Employers have an obligation under the Health and Safety at Work Act 1974 to provide training as far as reasonably practical to their employees. Health and Safety training helps improve performance and motivation of employees. Given the proper training it allows the employee to have an understanding on how to perform specific tasks, the reason it is being carried out and the risks and hazards that can occur. The construction and common law have placed a duty on employers to ensure that young persons are adequately trained as they are particularly vulnerable in the build environment as they have come from school or college.CSCS Cards The CSCS card scheme covers more than 220 occupations which includes management and supervision. The card will prove that the holder is competent enough in their work and has the health and safety awareness required to work on site. The card is used widely across construction sites; workers who do not carry one will not be allowed to work on site.CSCS is a voluntary registration scheme whereby trainees, workers, managers, supervisors, visiting professional etc., can obtain the relevant colour card which enables them to gain access to Major Contractors Group sites. (Cooke and Williams, 2009). A health and safety awareness test must be completed and passed in order to obtain the card. There are different types of card for each operative to match their roles such as apprentice, labourer, manager, experienced worker, trainee, skilled worker, advanced craft, technical supervisor and supervisory. All CSCS Card are valid for 5 years.3: Picture 3Work Permits A permit to work is a document that is issued by a person who is in charge of a particular work area. The permit will detail who is working in the area and will list any precautions that will need to be taken. It also must note if there is any isolation of services that maybe required. The permits are used to safely control certain activities on large projects and sites. Sites with several levels and floors may require the permit to list the different trades and all the people that are working in a particular area, in order for the supervisors to plan safely. Hot work permits are a means of being able to keep track of construction activities that will involve hot works and that they are being conducted safely. Hot work permits cover works such as welding, cutting and grinding; before hot works can be carried out the supervisor must check to see if anyone is scheduled to work in the same area at the same time, if that is the case the works will have to be rearranged if possible. Welders should check that no one is working on the floors below them before they st art any works to avoid accidents. The permit also allows the supervisor to be aware of what isolation will be required, when the work will be finished and what safety measures will be required. Permits are usually used for working on roofs, confined spaces, sewer works, gas installations and electrical installations. Some permits require the operative who is carrying out the works to sign the permit, which allows the supervisor to know who is working on site in an event of an emergency. The permit will show a list of the control measures that will need to be in place before the permit can be authorised. The permit must be signed of at the end of the day by all who have been working on it so that the supervisor knows that the works have been completed. For a permit to be issued a risk assessment and a method statement need to have been carried out to highlight the hazards and the control measures needed to reduce risk.CraneThe law requires that all lifting operations that involve lifting equipment must be planned out by a competent person, appropriately supervised and carried out in a safe manner. Cranes and its lifting accessories must be tested, adequately strong and examined and inspected. All persons who operate the crane and who are involved in the slinging loads and direct lifting operations must be trained and competent enough to do so. Cranes hold two main hazards on construction site; the falling of load and the collapse of the crane, both have significant potential for fatal injuries. When a crane is hired out the responsibility for the safe lifting operations is shared between the crane hirer and the crane user. Employers are responsible for ensuring the certification and qualifications of any operator that is on their site. Employers also have the responsibility to provide the certification at no extra cost to the operator. CITB offer courses for the required training for Tower cranes and mobile cranes which cover how to operate the crane safely, recognise signals for controlling the crane, carry out minor adjustments and understand the capabilities of the equipment and any relevant safety precautions. Upon successful completion of the course the operative will be entitled to receive a CPCS Red Trained Operator Card.Fork LiftsA forklift driver loads and unloads goods on site. Their main duties include moving, stacking and checking goods whilst performing daily equipment checks. The operative must complete an approved forklift training course before they can use the truck which will be provided by their employer. The training will be composed of formal, practical and evaluation stages to be awarded the certification. The formal element consists of classroom training, the practical component consists of hands-on skill-building and finally the evaluation process consists of being evaluated by a trainer and if successful the operative will take a final test which if successful will lead to certification.Task 2.2:Determine the training needs, site induction and relevant health and safety certification requirements for the projectUnder the Health and Safety at Work Act 1974 the employer is required to provide information, training, instruction and supervision necessary to ensure the health and safety of their employees as far as reasonably practical. The employers are required to consider the employees abilities to perform allocated tasks and provide the appropriate training when the employee first starts at a company, when they are given new tasks to carry out, when they have to employ new working practices and when they have to use new plant or materials. Training should be provided in working hours and should be given to permanent and temporary staff. Motivation and performance of employees improves when carrying out health and safety training. The training help the employee understand how to perform specific tasks, the hazards and risks involved and the reason it is being carried out. The law and construction legislation requires the employers to ensure that young workers are adequately trained. Young people who have just left school or college are particularly vulnerable when entering a new and different environment from what they have been in at school or college.4: Picture 4The range of training can vary due to the size and type of the company and the potential hazards that can arise from the work being carried out. Employees all have different levels within a company; there are many types of training to meet their various levels such as vocational training, academic training and accredited qualifications by NEBOSH. When training is given to employees a training plan and programme must be in place to state the objectives of providing the different types of planning. The training that is carried out should be at the appropriate level of the course that is being given. There are different types of training such as induction training, management training, supervisor training and training for employees.Induction TrainingAll new employees must have an induction; the induction will include a tour of the site, fire and emergency evacuation procedures, introduction of the company’s health and safety policy, details of specific hazards on site and permit to work procedures.Management TrainingManagers should receive training on Health and Safety Legislations, cost benefits analysis of accident prevention, risk management systems, safety procedures and audits, monitoring and revising safety plans and policies and motivation of staff relating to safety.Supervisor TrainingSupervisors require training for certain procedures such as common law duties of care, health and safety law and regulations, hazard identification, methods of risk assessment, accident reporting and investigations, inspection procedures and fire precautions.Employee Training All employees require training so that they are aware of site risks. Training can include how to identify a hazard, what to do when an accident occurs, how to maintain PPE, emergency procedures and fire procedures.Under the Health and Safety at Work Act 1997 the employers have to carry out risk assessments of task that are carried out by young workers before they start the task. Employers must take into account that young workers usually have no experience working with the equipment and machinery and no experience in identifying hazards. The work place will be a total different experience that they have experienced at school or college. Under common law and construction legislation the employer must ensure that young persons are appropriately and accurately trained. Supervision of young employees is vital especially when they first start on site. The sufficient supervision must be in place to correct or prevent any poor working habits that arise. The young employee must not fool around or play practical jokes in the workplace. If they are ever in doubt what to do they should ask their supervisor for instructions.Produce a typical Health and Safety policy document for the site and briefly explain training needed on a risk assessment and risk level conducted on the following site operations.Steel Fixing (Steel fixer)Excavation (Ground worker)Erecting Scaffold (Scaffold worker)Lift installerServices – steel pipe workerServices – electricianServices – PlumberHazard identification tools are used to identify hazards and the controls required for a specific task. Part of the risk assessment process needs to assess the harm that could come from a hazard. Risks are rated by their likelihood that the hazard will cause harm and where it will occur. Severity and likelihood are rated from a scale from 1 to 4 you then multiply the likelihood by the severity to work out the potential risk.This is the statement of general policy and arrangements for:Health and safety policyBarking & Dagenham College (Crèche)Overall and final responsibility for health and safety is that of:Richard Homewood – ManagerDay-to-day responsibility for ensuring this policy is put into practice is delegated to:Alan Burgess – Assistant ManagerStatement of general policyResponsibility of(Name / Title)Action / Arrangements(Customise to meet your own situation)To prevent accidents and cases of work-related ill health and provide adequate control of health and safety risks arising from work activitiesRichard HomewoodManagerComplete relevant risk assessments and implement the arising actions.To provide adequate training to ensure employees are competent to do their workAlan BurgessAssistant ManagerGive health and safety induction and provide the appropriate training.To engage and consult with employees on day-to-day health and safety conditions and provide advice and supervision on occupational healthRichard Homewood (Manager)Alan Burgess (Assistant Manager)Staff consulted on health and safety matters as they arise and also consult regular health and safety performance review meetings if required.To implement emergency procedures – evacuation in case of fire or other significant incident.  You can find help with your fire risk assessment at: (See note 1 below)Richard HomewoodManagerKeep escape routes well signed and clear at all times. Test evacuation plans from time to time and updated as required.To maintain safe and healthy working conditions, provide and maintain plant, equipment and machinery, and ensure safe storage / use of substancesAlan BurgessAssistant ManagerAll welfare facilities are to be provided. Have a system in place for routine inspections and testing of equipment and machinery and for ensuring that action is taken to address any defects.Health and safety law poster is displayed:Hording entrance, site office and induction roomFirst-aid box and accident book are located:Accidents and ill health at work reported under RIDDOR: (Reporting of Injuries, Diseases and DangerousSite office and induction roomOccurrences Regulations) (see note 2 below)Signed: (Employer)D ThomsonDate:23/05/2016Subject to review, monitoring and revision by:E JuwaraEvery: months or sooner if work activity changesSteel Fixer (Steel fixing)ActivityHazardsRisksCausesGeneral PlanningInsufficient Training, planning and improvisationInjuries due to inexperience, failure to provide appropriate equipment and inadequate consultation. Lack of Competency when carrying out the required tasks.Inadequate Information to the relevant employeesPlanning required not carried outUsing inappropriate equipmentLifting steel reinforcement to the workfaceLifting steel using craneInjury to operatives from the loads being lowered onto the deck or fall of loadCrane operator is not certified.Individual loads not inspectedSling capacity overloadedCommunication error between crane operator and doggerCutting steel reinforcementOperating angle grinder or drop sawElectric shock, electrocution or burnsFaulty EquipmentExtension lead damaged or faultyLead cut by angle grinder disk or saw blade.Slips or JumpsPoor accessSlips, trips and falls; strains and sprains; manual handling injuriesCluttered/poor housekeepingRisk Severity: 2 x 3 = requires further measuresExcavation groundwork (ground worker)ActivityHazardsRisksCausesInspectionExcavationCollapsesWeather conditionsTemporary support not adequate.Excavation of soilLoose materialsFalling in excavationVibrations from plant and vehiclesOther structures being underminingFixing temporary supportGetting in the excavationcollapsesGround conditionsWater coursesRisk Severity: 3 x 2 = requires further measuresErecting ScaffoldActivity HazardsRisksCausesScaffold installationFall hazardsFallingNot equipped with required guardrails, mid rails and toeboards Damaged or weak componentsHasn’t been installed with the required supportSlips or tripsPoor accessStrains and sprains; slips and tripsPoor accessUnsuitable handrails, midrails and toeboardsRisk Severity: 3 x 4 = Too dangerous to continue withLift InstallerActivityHazardsRisksCausesLift installationMoving/rotating machineryCutsAcquired protect not given/wornRequired training not givenConfined spacesNoxious fumes, reduced oxygen levels, or a risk of fire.Space not ventilatedInsufficient breathing appropriators LeaksLiquids and gasesValves haven’t been locked properlyRisk Severity: 4 x 4 = Too dangerous to continue withServices – Steel Pipe WorkerActivityHazardsRisksCausesPipe FittingfluidsLiquids and gasesDamage to pipe workRisk Severity: 2 x 4 = requires further measuresServices – Electrician ActivityHazardsRisksCausesWorking at heightGround base which the ladder is supported with is not firm enoughFalls, sprains and strainsOperative was instructed to carry out works and was not aware of ground conditionsUsing 110v Power toolsExtension cablestripsLeads were trailed across walk waysRisk Severity 4 x 3 = To dangerous to continue withServices – PlumberActivityHazardsRisksCausesRemoval of existing plumbing servicesConfined spacesAsbestos, gas leaksValves are shut of properlyRequired PPE is being wornRisk severity 2 x 2 = Okay with existing controlsHealth and safety should be second nature and not just an arduous tasksDescribe by giving an examples of suitable methods of recording health and safety inspections and data.Employers are required under the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations to report relevant enforcing authority and to keep records of work-related deaths, accidents, diseases, dangerous occurrences and injuries to the general public which are causes by an accident at the work place. The information that is provided by reports enables the Health and Safety executive and local authority to identify where and how risks arise and to investigate the accident. With the information provided from the reports the authorities are able to provide help and guidance on how to reduce injury and ill health in the work place. Details of all reportable incidents need to be recorded and include information such as the date, time and place of the accident, personal details of those involved, the method of reporting and a brief description of the event.  Records can be kept in any form as long as they conform to the data protection requirements. One method of reporting and meeting the requirements is using the site accident book. The site accident book is used by employees and employers to record the details of near misses and injuries on site. The accident book is a part of the management of health and safety which requires all details of injuries to be recorded. The accident book needs to be available for inspection at all times and needs to be kept for at least 3 years after the last entry.When reporting an incident a HSE approved form must be filled out related to the accident, dangerous occurrence, disease or gas incident that has occurred. Responsible personal should complete the form and send it to the HSE so it can be submitted to the RIDDOR database. Reports include:F2508 – Report of an InjuryF2508A – Report of a case of diseaseF2508G1 – Report of flammable gas incidentsF2508G2 – Report of a dangerous gas fittingF2533/F2534 – Safety representatives – inspection/report formThe RIDDOR Regulations give guidance on the injuries that need to be recorded. Minor injuries are described as injuries that keep an operative off of work for more than 3 days and major injuries include fractures, amputations, dislocations, loss of sight and illness requiring medical treatment. It is important that a construction company collects accident data; it will help aid to prevent future accidents also the client will need to make it a requirement as it is a part of their tender procedure which allows them to check for the company’s competency. If a member of the public is killed or hospitalised the HSE must notified by telephone straight away.Explain the need for toolbox talks, daily site updates/evaluations and constant updating of training.Control measures need to be in place on site to enforce safe systems. Having control measures on site helps to prevent, reduce, mitigate and eliminate health and safety risks. Workplace procedures need to be developed, implemented, maintained and checked to see if they are working. Daily site updates need to take place to ensure that the site is running safely and efficiently. It is a legal requirement for employers and the self-employed to carry out risk assessments to identify the possible risks that can arise from the works that they will carry out. Employers must look at the work activities that have potential to cause harm and decide what actions should be taken to meet the legal obligations. The Health and Safety at Work Act requires the employers to carry out an examination of their work activities and record their findings of the assessment. It is important to involve operatives who carry out the works in the risk assessment as they will be able to bring their own experience and knowledge of the activity.Toolbox talks are used as a safe system of work; they identify hazards and keep all employees informed of the dangers on site. The toolbox talk gives opportunity to management and the safety department to communicate to the employees on how they can carry out their works and tasks safer and better. Toolbox talks should focus on single topics and be held regularly for a greater impact. The purpose of a toolbox talk is to keep health and safety a priority and to provide an open environment so that issues can be raised. The toolbox talks allow feedback from the workforce and make the workers feel involved in their safety which should have a positive effect on their compliance to health and safety measures which in turn should reduce accidents on site. Talks should be held at the start of a shift in order to make the workers aware of the health and safety risks they may face during the working day. A toolbox talk usually lasts for 10 minutes to present the toolbox talk and then at the end questions and feedback will be held for 5 minutes. The talks should be based upon the accident reports as they should highlight the areas of concern such as delivering a talk on good housekeeping to avoid hazards such as:Site organisationSlips, trips and fallsWorking at heightCranesElectricityFirePlantDemolitionStructural stabilityTraining allows operatives to learn how to carry out something in the appropriate and correct manor. Providing training helps the operative understand how to work safely, meet legal duties and have health and safety become second nature to them. If training is carried out effectively it will ensure that operatives will be competent in health and safety, avoid the distress that accidents and ill health can cause and avoid financial costs of accidents and ill health such as loss of production. The Health and Safety at Work Act 1974 requires that operatives are provided with information, training, instruction and supervision necessary in order to ensure the health and safety of all employees. Whether an employer or self-employed they need to know how to identify hazards. They need to understand the health and safety policy and how health and safety should be managed. Training can also be given regarding a specific hazard and how the risks can be controlled. New employees will require