Development of Energy Efficient Lighting Technology LED VS TUNGSTEN AbstractSince many government regulations are clamping down on wastage of energy. Incandescent lighting technology and many Lighting producing companies focusing on developing more energy efficient lighting technology. Therefore, it is important to discuss the emergence and growing popularity of the lighting.Contents1 Introduction1.1 Background2 Key Themes3 Aims and Objectives3.1 Project Aim3.2 Project objectives4 Rationale5 Tasks6 Resources7 Literature Research Methodology8 Risk Assessment9 Ethics Review10 Appendices10.1 A1: Bibliography10.2 A2: ScheduleIntroduction1.1 BackgroundLED is used for light fixtures which were created in 1962 to produce light using a light emitting diode (LED). Since then the technology has grown rapidly, with LED lights becoming an extremely popular lighting solution in recent years amongst many Studio lighting producing companies. LEDs have become the most efficient source of lighting available, using up to 90% less energy than incandescent lighting and 60% less than fluorescent lighting (Bevan, 2017). The process of generating light is what distinguishes LEDs from traditional lighting, as regular incandescent bulbs produce light by creating heat.Light Emitting Diodes is an electrical light source that only allows an electrical current to flow in one direction. LEDs contain two conductive materials that are placed in contact with each other. Once electricity is applied to the diode, the atoms in one material become charged with energy. This energy is then released in the form of electrons into the other conductive material this release of energy is what creates light (Bevan, 2017). It is basically a semiconductor that can convert electricity to light.Tungsten lighting refers to the common incandescent light bulb. Incandescent light is an electric light that is heated to such a temperature that it glows to provide artificial light to indoor areas. The filament used in tungsten is metal, with a very high melting point and capability to glow when heated (McGill, 2015). This method of producing artificial lighting is highly inefficient as they can only convert 5-10% of the energy they produced into the light, while the remaining energy is converted to heat. This results in an extreme waste of electricity (Beaconlighting.com.au, 2019). Whereas, most attractive benefits of LED lighting over traditional lighting technology has been its super efficiency when compared to other light sources.2 Key ThemesIn order to prepare great art, it is necessary to control and manipulate light correctly to get the best luminosity, texture, colour and vibrancy. Advanced technology and innovative gadgets had overall changed dynamics of the media industry. It now demands a professional production and for that lighting carries great weight in terms of settings and toning up mood (PAUL, 2016). However, most of the productions are still using traditional light kits but since last decade LEDs are becoming convenient and a conservative option.The following project will tend to look into the technology behind Led lighting and Tungsten Lighting. Various comparisons would be made ranging from their efficiency, cost effectiveness, environmental friendliness, availability, life span and specifically their uses in the studio when it comes to cinematography. The advantages and disadvantages of both technologies would be discussed as well. Moreover, an in-depth study of lighting kits available at the university would be done. Furthermore, we would be evaluating LED lighting and Tungsten fixtures in terms of their output power and colour accuracy.3 Aims and Objectives3.1 Project AimAccording to online records, Spaghetti studio a popular hire studio, have over 25 lighting kits ranging from LED Top light to Fluorescent Flolight to 3x Fresnel Dedolight. This lightning comes in different power ranges powered by different lighting technology giving one different option to choose from.This project aims to:Project Aim3.2 Project objectivesThe following research is expected to act as a catalyst for a better change in the university lighting and improved content creation. At the end of this project the following objectives would have been achieved:? Evaluating LED light availability in University? Monitoring output power and colour accuracy? Critically evaluating benefits of LED over Tungsten.? Comparing results of all different tests? Evaluating and concluding new lights requirements? Proposal on best Lighting kits to University for future purchase based on findings4 RationaleAs it is often said Change is constant, there is a need for constant re-evaluation of kits accessible at the university. Technology is fast evolving based on unending demands for more energy efficient, environmentally friendly, safer and easy to use lighting source, more lighting producing companies such as ARRI and ROTO light are focusing on LED lighting technology, as it is observed in their recent products.It is important that the university too gradually starts embracing the LED lighting technology as it has been predicted by many productions of Tungsten lighting will reduce over the years with more focus and research on the earlier mentioned technology (Beaconlighting.com.au, 2019).There is also an increasing advantage of LED over Tungsten lighting in the cinematography world as its technological advances. This is highlighted by the major lighting renovation done by KNPB-TV a broadcast studio as they transitioned to LED lighting, replacing all the Incandescent fixtures (Leeper, 2018)5 TasksThe following project is expected to be completed in 4 phases. Each phase consists of a few tasks, all the task of each needs to be completed before moving on to the next phase.WBSTask NameDurationStartFinishPredecessors0LED VS TUNGSTEN38 days3/4/20194/24/20191 Project Initiation12 days3/4/20193/19/20191.1 Defining Purpose3 days3/4/20193/6/20191.2 Defining Aims and Objectives3 days3/7/20193/11/201921.3 Initiating Research2 days3/12/20193/13/201931.4 Comparing Led lights with Tungsten4 days3/14/20193/19/201942 Project Plan8 days3/14/20193/25/20192.1 Preparing Project Plan3 days3/14/20193/18/201942.2 Preparing a Procurement Plan2 days3/19/20193/20/201972.3 Documenting the benefits3 days3/21/20193/25/201982.4 Preparing Risk plan2 days3/19/20193/20/201973 Project Execution18 days3/19/20194/11/20193.1 Looking at popular hire studios2 days3/19/20193/20/201973.2 Conducting Research2 days3/21/20193/22/2019123.3 Conducting Test3 days3/25/20193/27/20193.3.1 Tungsten Power Consumption2 days3/25/20193/26/2019133.3.2 Texture differences1 day3/25/20193/25/2019133.3.3 Colour Differences3 days3/25/20193/27/2019133.3.4 Vibrancy Test2 days3/25/20193/26/2019133.4 Comparing Results2 days3/28/2019 3/29/2019143.5 Evaluation3 days4/1/20194/3/2019193.6 Preparing Proposal for new equipment3 days4/4/20194/8/2019203.7 Documenting comparative advantages2 days4/9/20194/10/2019213.8 Documenting competitive advantage3 days4/9/20194/11/2019214 Project Closing9 days4/12/20194/24/20194.1 Forwarding the proposal2 days4/12/20194/15/2019114.2 Ensuring All Test Are Conducted Fairly3 days4/16/20194/18/2019254.3 Highlighting Importance of LEDs2 days4/19/20194/22/2019264.4 Proposing Innovative Lights1 day4/23/20194/23/2019274.5 Providing Pictures of Different studios1 day4/24/20194/24/2019285 Research Complete0 days3/4/20193/4/20196 ResourcesResources play an important for the development of any project. In order to conduct the research we would be needing following resources to test texture, colour, luminosity and vibrancy of the project;? Human Capital? Equipment? Knowledge of American Cinematography? LED Lighting: Professional Techniques for Digital Photographers? Online tools? Statistical tools? Light meter7 Literature Research MethodologyThe role of a methodology in research is the process which is used to collect data, process it into meaningful information that is basically used to support the aim of the thesis. The methods for gathering this data will be in a systematic form so as to guarantee that the correct statistical data is gathered. This following research project methodology constitutes a systematic literature review. The key purpose to conduct the research is to synthesize the result of colour, texture, luminosity, and vibrancy with the advanced LED lighting compared to Tungsten lighting. The data for all following test is to be collected from university premises using data collection tools. Moreover, the project follows 4 phase process in order to complete with the research methodology8 Risk AssessmentRisk assessment has now become a very important part of the project management, the key purpose is to remove uncertainty, prevent accidents and control the overall project cost while executing, controlling and implementing the project (MAJEED, 2018). Although there are no set rules for risk assessment and control procedures usually researchers take some general steps to identify risk and practicable control measures to ensure project success and purpose.There is no risk attached to this project, as findings would be acquired from the online sources and visiting the site. However, while conducting the research and executing the project following risk can be deduced;IDRisk NameRisk DescriptionImpactProbabilityProactive Response Plan1Systematic RiskEvery proposed imaging project starts with some kind of challenge or a combination of challengesHMRecheck every detail before processing things further.2Team AbilityResults in underestimating efficiency and performance.LHEnsure team is capable enough.3GremlinsBut something wont work the way it is supposed toMMMonitoring the project results carefully.4Training to adjust LED LightQuality training for certain skills can be difficult to secure. HLHiring experts/consultants5Design lacks flexibilityPoor design makes change requests difficult and costlyVHVHEnsuring design adapts to the core purpose of photography and cinematography.9 Ethics ReviewEthics is simply knowing the difference between the right and wrong where every right step builds blocks for a better society. The one who isnt aligned with ethics is a wild beast who is lost in this world. There are no major ethical implications surrounded by the following research. Comparatively, the following research plan strives for a better environment by saving energy for a better future.10 Appendices10.1 A1: Bibliography? Bevan, R. (2019). What is led a beginners guide to led lighting? [Online] https://www.lyco.co.uk. Available at: https://www.lyco.co.uk/advice/what-is-led-a-beginners-guide-to-led-lighting/ [Accessed 24 Jan. 2019].? Beaconlighting.com.au. (2019). What is LED lighting? [Online] Available at https://www.beaconlighting.com.au/what-is-led-lighting [Accessed 20 Jan. 2019].? Leeper, S. (2019). An Easy Introduction To LED Studio Lights
Rosco Braq
. [Online] Rosco Spectrum. Available at: https://www.rosco.com/spectrum/index.php/2018/08/easy-intro-to-led-studio-lights-braq-cubes/ [Accessed 23 Jan. 2019].? McGill, J. (2019). What is a tungsten light bulb? [Online] hunker.com. Available at: https://www.hunker.com/13412704/what-is-a-tungsten-light-bulb [Accessed 22 Jan. 2019].? MAJEED, M., 2018. Risk Management: an Important Part of Project Management. 10 October.? PAUL, J., 2016. LED lights are being used more in production, but how do they stack up against fluorescent and tungsten?. 6 January.? Staff, S. (2019). Lighting Comparison: LED vs Incandescent Lighting. [Online] Stouchlighting.com. Available at: https://www.stouchlighting.com/blog/light-comparison-led-lighting-vs-incandescent-lighting [Accessed 21 Jan. 2019].10.2 A2: Schedule
