Design a PV system to process 1000kW of power at 460 V, 60 Hz, three-phase AC, built from the PV Module listed in the table below. 250kW central inverters will be used per PV array, with the internal power electronics operating with a 5.4 kHz switching frequency and amplitude modulation index of 0.8567. Determine the following:
a. The number of PV modules in a string to result in holding 460Vac during maximum generation output.
b. The number of strings in an array.
c. The number of PV arrays are required, and total area occupied by this 1MW facility.
d. The number of Inverters used and frequency modulation of the inverters.
e. The one-line diagram of this system with specifications written of the PV Array(s).
